Point of contraflexure
The point of contraflexure (PoC) occurs where bending is zero and at the point of change between positive and negative (or between compression and tension). |
In a beam that is flexing (or bending), the point where there is zero bending moment is called the point of contraflexure. At that point, the direction of bending changes its sign from positive to negative or from negative to positive. (It may also be thought of as a change from compression to tension or vice versa).
For this change to happen, it must pass through zero – the point of contraflexure. On a bending moment diagram, it is the point at which the bending moment curve intersects with the zero line.
An analogy may be made with a speeding train travelling west on a single track. In order to reverse direction and travel east, it must decelerate, stop then accelerate in the opposite direction. The point it stops, even if momentary, is zero – the neutral point, where it is not travelling.
Theoretically, when considering a structural member under load, such as a reinforced concrete beam, the point of zero bending moment would seem to suggest no reinforcement would be required. However, omitting reinforcement at that point is considered inadvisable as, in a real-life situation, it may be difficult to locate the exact point of contraflexure.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Industry survey highlights persistent skills gap
Building engineering business survey by ECA in partnership with BESA, SELECT and SNIPEF.
IHBC Conservation Professional Practice Principles
Spotlighted in HEF Historic Environment Overview.
CIAT collaborates with CIOB, CIfA, Icon to launch The Arc
Helping clients find specialist historic environment professionals.
Government building safety remediation data releases
Show some progress, but a 50% gap not yet started.
Testing For A Safer Future; an initial industry response
A response to the Independent Review of the Construction Product Testing Regime.
Requirements for UK buildings in certain circumstances.
CLC guidance for dutyholders and accountable persons.
Types of contractor in the construction industry
A long list, but are any missing ?
The Housing (Cladding Remediation) (Scotland) Bill 2023
Unanimously approved to legislation on May 14, 2024.
Asset information requirements AIR
In detail, with links to further resources.
Where it's AT Building Safety podcasts from CIAT
Unravelling the Golden Thread and CIAT’s Principal Designer Register for non-HRBs and HRBs.
What happened to Hadrian's Wall?
Its former stones can be found in buildings near its route.
Strategic ventilation in modern building design
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.